Description
Reference: PA111EU EAN code: 821812035468
Product name: Primair Plus
Maker: Honeywell Safety Products.
Protection type: Respiratory ProtectionBrand: Honeywell
Packaging: 1 unitPRIMAIR PLUS is a complete hood available as standard or coated for occasional splashes. It is within the range of air hoods designed for use with driven air such as the Compact Air 200.
This model is semi reusable. It is recommended in a work area where protection
It is necessary for the respiratory organs, face and head against harmful particles, mists, gases and vapors.
This system provides air to the user through the supply hose, connected between PAPR (equipped with filters) and the hood.
Filtered airflow enters through the rear or flows through the hood through the air duct and exits the hood through the bib.
Product Use:
For use with powered air respirators, whenever the entire head and shoulders must be protected
– Handling of light chemicals
– Handling of powders and liquids in the pharmaceutical industry
– Agricultural use
– Paint spraying
Characteristic:
-Comfort and fit. The disposable part is made of Tyvek® coated to ensure chemical resistance and is easily replaced by undoing 2 side push buttons. Extremely light and comfortable reusable harness and air duct, reduces costs Air duct draws air up to the visor, no fogging, no cold air on the wearer’s head Primair Plus adjustable bib length – workers choose the length for them.
-Safety. Visor resistance to solvents and light impacts. Chemical splash resistant hoods. Removable window. Protect the lens from splashes and extend its life. Transparency of its visor.
-Reliability. Components are 100% recyclable
Technical Description:
Materials:
Mask: High-density polyethylene (HDPE) and low-density polyethylene (LDPE) headgear • High-density polyethylene air duct
(HDPE) and low density polyethylene (LDPE) • Hoods in Noryl • Face seal in polyethylene (PE) and stretch cotton
Visor Screen: Vision Filing: 28cm x 20cm
Visor screen material: Co-polyester, 0.040 mil.
Visor Screen Covers: 3 Layer Mylar
Certifications:
EPI Category III.
EU Certification 0082/236/079/06/19/0625Storage Information:
All respirators are stored in a clean, dry environment away from any contaminants. Users can store their Honeywell PRIMAIR PLUS Series Harness in its original box, any carrying case or in a closed wall case.
Care Instructions:
Checks before use:
Make sure that the system, after its last use, has been properly cleaned, disinfected and registered in accordance with the manufacturer’s instructions included in the user manual.
Donning the Primair Plus hood:
Connect the supply hose from the Compact Air 200 powered air respirator to the rear of the air hood.
Buckle the belt around your body and press the respirator switch.
Adjust the headband to the correct length.
Put the air hood on your head.
Cleaning:
After each session, clean the air hood with a mixture of water and a soft cloth (part # 1779065 EPI U-S).
Subsequently rinse thoroughly with clean water. (Do not use solvents).
The neck of the face or the bib can be washed in the washing machine, with a mild detergent at 30 ° C.
With a disinfectant, clean the internal surfaces of the air hood.
With a dry cloth, dry all metal components, thus avoiding corrosion.
