Description
Reference: 405B EAN code: –
Product Name: 405B TUFF JUBA GLOVE
Maker: Juba
Production Type: GlovesProduct: Work gloveType: cow grain leather and canvasPackaging: 12 Pairs/pack. 60 Pairs/box
Characterstics:
Economic version.
Cotton lining on the palm.
Leather reinforcement on knuckles and fingernails.
Flexible.
RECOMMENDED WORK GLOVES FOR:
Electrical and mechanical assemblies.
Naval building.
RefineriesAgricultural use.
Railways.
Automotive.
Boilermaking.
Wood Industry.
Technical Description- Glove color: Blue / natural
– Material: Cow grain leather and canvas- Sizes: 7 / S, 8 / M, 9 / L, 10 / XL, 11 / XXL
– Length: S – 23 cm / M – 24 cm / L – 25 cm / XL – 26 cm / XXL – 27 cm
– Thickness: 1.1-1.2 mm
– Glove marking: EN 388 (2132X)
Certifications:
EN388: 2016 Protective gloves against mechanical risks.
The EN388: 2003 standard is renamed EN388: 2016, the year of its revision. The reason for the modification is given by the discrepancies in the results between laboratories in the blade cut test, COUP TEST. Materials with high levels of cutting produce a dulling effect on circular blades that detracts from the result.
En388:2016 benefit levels 1 2 3 4 5
6.1 abrasion resistance (cycles) 100 500 2000 8000 –
6.2 cut resistance per blade (index) 1,2 2,5 5 10 20
6.4 tear strength (newtons) 10 25 50 75 –
6.5 puncture resistance (newtons) 20 60 100 150 –
The new regulation was published in November 2016 and the previous one is from 2003. During these 13 years, there has been a great innovation in the materials for the manufacture of cutting gloves, they have forced to introduce changes in the tests to be able to measure more rigorously the levels of protection. If you want to know more about the main changes in these regulations, you can consult it through our website www.jubappe.es
Eniso13997: 1999 performance levels A B C D E F
6.3 tdm: shear strength (newtons) 2 5 10 15 22 30
A – Abrasion Resistance (X, 0, 1, 2, 3, 4)
B – Resistance to cutting by blade (X, 0, 1, 2, 3, 4, 5)
C – Tear Resistance (X, 0, 1, 2, 3, 4)
D – Puncture Resistance (X, 0, 1, 2, 3, 4)
E – Cutting for sharp objects ISO 13997 (A, B, C, D, E, F)
F – Impact test complies / does not comply (It is optional. If it complies, put P)
