Description
Reference: 1786730 EAN code: —
Product name: Aluminium Filter Rd40 A2B2E2K1NOP3
Maker: Honeywell Safety Products.
Protection type: Respiratory Protection Product: Filter RD40
Type: A2B2E2K1NOP3. RD40.
Brand: Honeywell
Diameter: 107 mm
Packaging: 1 unidad
Characteristics:
– Type of industry: Agriculture, automotive, spare parts manufacturer, aviation, construction and building. Chemical and pharmacological industry, laboratories, industry related to metals and steels and manufacturing industry in general.
– The A2B2E2K1NO P3 filter is used for protection against toxic gases of the types A, B, E, K and NO according to EN 141: 1990 (i.e. gases and vapors organic and inorganic, acid gases and vapors, sulfur dioxide, amines organic). Nitric products and vapors, as well as toxic dust and particles and solid or liquid aerosols according to EN 143 class 3): filter high efficiency spray (99.95%).
– Honeywell mask and filter set A2B2E2K1NO P3 should only be used when the toxic concentration meets the standards for the use of a mask, that is, when it is below 1000 x TLV.
(TLV = TWA for 8 hours of work or STEL for 15 minutes of work)
(cf. INRS document ed. 780 “Respiratory protection devices”).
– Light and resistant plastic housing.
– Does not obstruct the field of vision.
– Threaded connection to Honeywell masks, ensuring a reliable connection and excellent sealing- Activated coconut charcoal- Very high absorption capacity.
Gases Tested:
– Carbon tetrachloride CCl4
– Chlorine Cl2
– Hydrogen sulfide H2S
– Hydrocyanic acid HCN
– Sulfur dioxide SO2
– Ammonia NH3
– Nitrogen monoxide NO
– Nitrogen dioxide NO2
– Hydrocyanic acid HCN
– Cyanogen chloride ClCN- The volume concentration of the test gas is:
0.5% for categories A, B and E,
0.1% vol. for K, 2.5% vol. for NO, NO2 and CO
and 2 g / m3 for HCN, ClCN.
– The air flow tested is 30 liters per minute.
– Minimum duration required before the “advance”:
CCl4 40 min.
Cl2 20 min.
H2S 40 min.
HCN 25 min.
SO2 20 min.
NH3 50 min.
NO 20 min.
NO2 20 min.
HCN 120 min.
CCl4 100 min.
– Tested aerosols:
* Paraffin oil for liquid particles* Sodium chloride for solid particles- The air flow tested is 95 liters per minute.
– Aerosol penetration for the test must be less than:
– 0.05% for sodium chloride- 0.05% for paraffin oil- Respiratory resistance less than:
2.2 mbar at 30 l / min
8.2 mbar at 95l / min.
Certifications:
EPI Category III.
ISO 9001/2000
Checks before use:
Users must:
– Make sure that the level of protection offered by the filter is sufficient for the type and concentration of the contaminant in the work area.
– Respect the expiration date that appears on the filter.
– Check the hermetic closing points.
Storage information:
– Store the filters in a cool, dry place with the caps on- Storage temperature range: -20 ° C / + 50 ° C
– Maximum humidity during storage: 80%
Limitations of use:
– For the exclusive use of trained and qualified personnel.
– Do not use if the oxygen level in the environment is less than 17%.
– Do not use with organic gases and vapors with a boiling point below 65ºC.
– After use, an open filter will be properly repackaged with its caps if it is likely to be reused. It must be replaced within 6 months after opening.
– If a user identifies the filter rupture through the smell or the knowledge of a gas, the filter must be replaced immediately.
– If the breathing resistance of the filter increased significantly, it must be replaced.
– Particular precautions to be taken in ATEX environments.
– Filter with a mass greater than 300 g cannot be used directly on half masks.
