Description
Reference: 1783030 EAN code: 7312557830300
Product name: Aluminum Filter Rd40 B2P3
Maker: Honeywell Safety Products.
Protection type: Respiratory protectionProduct: Filter RD40
Type: B2P3. RD40.
Brand: Honeywell
Weight: 380gr.
Packaging: 1 unitCharacteristics:
– The B2P3 filter is part of the wide variety of filters offered in order to protect against inorganic gases and vapours, solid and liquid particles.
– For use with mask equipped with Rd40 connector.
– The Honeywell product range provides high quality and economical protection.
– The aluminum housing allows easy detection of damage caused by external vibrations, which offers greater security.
– Performance requirements for gas and particulate matter significantly exceed the standard for filtration efficiency over extended periods of time.
– High quality charcoal filter, additionally treated for optimal gas absorption.
– Specific filter structure that offers low breathing resistance and greater user comfort.
– Low profile so that it does not obstruct the field of vision.
– Individual packaging.
– Includes safety caps at both ends of the storage.
– Once opened, up to 6 months.
– Material: special aluminum alloy with PE cover activated charcoal, chrome free. Coconut shell charcoal.
– Storage period: 4 years after the date of manufacture. 6 months after opening.
– Duration of use: It depends on the absorption capacity, the concentration of pollutants, the humidity and the user’s breathing.
Certifications:
EPI Category III.
Standards: EN 141
ISO 9001/2000
Checks before use:
Users must:
– Make sure that the level of protection offered by the filter is sufficient for the type and concentration of the contaminant in the work area.
– Respect the expiration date that appears on the filter.
– Check the hermetic closing points.
Storage information:
– Store the filters in a cool, dry place with the caps on- Storage temperature range: -20 ° C / + 50 ° C
– Maximum humidity during storage: 80%
Limitations of use:
– For the exclusive use of trained and qualified personnel.
– Do not use if the oxygen level in the environment is less than 17%.
– Do not use with organic gases and vapors with a boiling point below 65ºC.
– After use, an open filter will be properly repackaged with its caps if it is likely to be reused. It must be replaced within 6 months after opening.
– If a user identifies the filter rupture through the smell or the knowledge of a gas, the filter must be replaced immediately.
– If the breathing resistance of the filter increased significantly, it must be replaced.
– Particular precautions to be taken in ATEX environments.
– Filter with a mass greater than 300 g cannot be used directly on half masks.
