Description
Reference: 1788166 EAN code: 7312557881661
Product name: Plastic Filter Rd40 AXP3 XL
Maker: Honeywell Safety Products.
Protection type: Respiratory protection.
Product: Filter RD40
Type: AXP3 XL. RD40.
Brand: Honeywell
Packaging: 1 unitWeight: 390 g
Characteristics:
– The AXP3 XL filter is part of the wide variety of plastic filters offered in order to protect against organics gasses and vapours with a boiling point below 65°C and solid and liquidparticles.
– The Honeywell product range provides high quality and economical protection.
– For use with full face mask and half mask equipped with an Rd40 connector- ABS material with plastic cover High activated charcoal- Diameter 106 mm
Certifications:
EPI Category III.
Quality Assurance ISO 9001 / 2000
EU Certification Declaration of conformity APAVE – 1788166
Checks before use:
Users must:
– Make sure that the level of protection offered by the filter is sufficient for the type and concentration of the contaminant in the work area.
– Respect the expiration date that appears on the filter.
– Check the hermetic closing points.
Life cycle: It depends on the absorption capacity, the concentration of pollutants, the humidity and the respiration of the user.
Storage information:
-4 years after the date of manufacture
-6 months after opening- Store the filters in a cool, dry place with the caps on- The maximum allowed storage period is specified in the filter- Storage temperature range: -20 ° C / + 50 ° C
– Maximum humidity during storage: 80%
Limitations of use:
– For the exclusive use of trained and qualified personnel.
– Do not use if the oxygen level in the environment is less than 17%.
– After use, an open filter will be properly repackaged with its caps if it is likely to be reused. It must be replaced within 6 months after opening.
– If a user identifies the filter rupture through the smell or the knowledge of a gas, the filter must be replaced immediately.
– If the breathing resistance of the filter increased significantly, it must be replaced.
– Particular precautions to be taken in ATEX environments.
– Filter with a mass greater than 300 g cannot be used directly on half masks.
– AX and AXP3 canister are single use only. They must be replaced after each shift.
Disposal
