Description
Reference: PA121EU EAN code: 821812035468
Product name: Primair Plus cOATEDMaker: Honeywell Safety Products.
Protection type: Respiratory ProtectionBrand: Honeywell
Packaging: 1 unitPRIMAIR PLUS is a full hood available with liner for occasional splashes.
It is part of the range of air hoods designed for use with blown air such as the Compact Air 200.
This model is semi reusable. It is recommended for working in areas where protection for the respiratory organs, face and against harmful particles, mists, gases and vapors is required.
Product Use:
For use with powered air respirators, whenever the entire head and shoulders must be protected
– Handling of light chemicals
– Handling of powders and liquids in the pharmaceutical industry
– Agricultural use
– Paint spraying
Characteristic:
Comfort and fit. The disposable part is made of coated Tyvek® to ensure chemical resistance and is easily replaced by removing the 2 side push buttons. Extremely light and comfortable. Reusable helmet and air duct, reduce costs. Air duct that brings air to the visor, no fogging, no cold air on the wearer’s head. Primair Plus Adjustable Bib Length – Workers choose the length that’s right for them.
Safety. Visor resistant to solvents and light impacts. Chemical splash resistant hoods. Removable window. Protect the lens from splashes and extend its life. Transparency of its visor.
Reliability. Components are 100% recyclable
Technical Description:
Materials:
– Headgear in high-density polyethylene (HDPE) and low-density polyethylene (LDPE)
– Air duct in high-density polyethylene (HDPE) and low-density polyethylene (LDPE)
– Hoods in Noryl – Face seal in polyethylene (PE) and stretch cotton
Visor screen:
Display area: 28 cm x 20 cm
Visor screen material: Co-polyester, 0.040 mil.
Visor screen covers: Mylar, three layers per sheet
Head and Neck Cover: Polypropylene Saranex Coated Tyvek Chin Guard
Certifications:
EPI Category III.
EU Certification 0082/236/079/06/19/0625
Storage Information:
All respirators are stored in a clean, dry environment away from any contaminants. Users can store their Honeywell PRIMAIR PLUS Series Harness in its original box, any carrying case or in a closed wall case.
Care Instructions:
Checks before use:
Make sure that the system, after its last use, has been properly cleaned, disinfected and registered in accordance with the manufacturer’s instructions included in the user manual.
Donning the Primair Plus hood:
Connect the supply hose from the Compact Air 200 powered air respirator to the rear of the air hood.
Buckle the belt around your body and press the respirator switch.
Adjust the headband to the correct length.
Put the air hood on your head.
Cleaning:
After each session, clean the air hood with a mixture of water and a soft cloth (part # 1779065 EPI U-S).
Subsequently rinse thoroughly with clean water. (Do not use solvents).
The neck of the face or the bib can be washed in the washing machine, with a mild detergent at 30 ° C.
With a disinfectant, clean the internal surfaces of the air hood.
With a dry cloth, dry all metal components, thus avoiding corrosion.
