Description
Reference: 1785010 EAN code:
Product name: Aluminum Filter Rd40 A2
Maker: Honeywell Safety Products.
Protection type: Respiratory protection Product: Filter RD40
Type: A2. RD40.
Brand: Honeywell
Packaging: 1 unit Weight: 276 g
Characteristics:
– The A2 filter is part of the wide variety of filters offered in order to protect against various dangerous gases in different applications.
– For use with mask equipped with Rd40 connector.
– The Honeywell product range provides high quality and economical protection.
– The aluminum housing allows easy detection of damage caused by external vibrations, which offers greater security.
– Performance requirements for gas and particulate matter significantly exceed the standard for filtration efficiency over extended periods of time.
– High quality charcoal filter, additionally treated for optimal gas absorption.
– Specific filter structure that offers low breathing resistance and greater user comfort.
– Low profile so that it does not obstruct the field of vision.
– Individual packaging.
– Includes safety caps at both ends of the storage.
– Once opened, up to 6 months.
– Material: special aluminum alloy with PE cover activated charcoal.
– Diameter: 106mm.
– Storage period: 5 years after the date of manufacture. 6 months after opening.
– Duration of use: It depends on the absorption capacity, the concentration of pollutants, the humidity and the user’s breathing.
Certifications:
EPI Category III.
EN 14387:2004
Checks before use:
Users must:
– Make sure that the level of protection offered by the filter is sufficient for the type and concentration of the contaminant in the work area.
– Respect the expiration date that appears on the filter.
– Check the hermetic closing points.
Limitations of use:
– For the exclusive use of trained and qualified personnel.
– Do not use if the oxygen level in the environment is less than 17%.
– Do not use with organic gases and vapors with a boiling point below 65ºC.
– After use, an open filter will be properly repackaged with its caps if it is likely to be reused. It must be replaced within 6 months after opening.
– If a user identifies the filter rupture through the smell or the knowledge of a gas, the filter must be replaced immediately.
– If the breathing resistance of the filter increased significantly, it must be replaced.
– Particular precautions to be taken in ATEX environments.
– Filter with a mass greater than 300 g cannot be used directly on half masks.
