Description
Reference: BW ICON PLUS EAN code: –
Product Name: Multigas Detector BW ICON PLUS
Maker: Honeywell Safety Products.
Protection Type: Respiratory protectionProduct: Gas Detector
Type: 4 Gases
Brand: Honeywell
Packaging: 1 unitCharacteristics:
Like the Fixed Life Honeywell BW ™ Icon, the Honeywell BW ™ Icon + gets its name from its simple icon display of gas levels and device status. That means there are no direct gas readings on the screen for workers to interpret and / or require additional special training. Instead, and in the event of a gas alarm, the alarm icon on the screen will illuminate, along with an indicator next to the activated sensor, so workers can quickly evacuate the area.
TRUSTWORTHY
• 2 months of battery life on a 4.5 hour charge, and up to 4 months if the detector is turned off at the end of each shift. No daily battery charging, no unexpected downtime.
• Does not require technical service, turn on and use 2 years.
• With integrated BlueTooth for easy data downloads and / or quick report creation through the Safety Suite Device Configurator App.
COMPATIBLE
• Compatible with IntelliDoX and Honeywell Safety Suite automatic detector management system.
• Compatible with TouchConnect using Bluetooth® for wireless configuration.
EASY TO USE
• Small, light, and simple to carry.
• One-button operationPRECISE
Low-power infrared LEL sensor is immune to silicone poisoning, which means accurate monitoring of fuels.
SENSITIVE
• New Series 1 sensors respond in seconds, even in very demanding temperatures.
EASY TO USE
• The IntelliFlash ™ green led-light system indicates correct operation and compliance defined in its configuration; the amber led-light indicates the need for maintenance.
Technical Description:
– Dimensions: 108.2mm x 61.5mm x 43.2mm with Alligator Clip
108.2mm x 61.5mm x 37.8mm B47 with Klick Fast accessory- Weight: 185 g with Crocodile Clip, 169 g with Klick Fast accessory- Operating temperature: -40 ° C to 60 ° C
– Humidity: 5% to 95%
– Ingress Protection: IP66, IP68
– Alarms and Types: Visual, vibrating, audible (95 dB); Low, High, TWA, STEL, Val. Negative, Out of Range, Multiple Alarm- Self Test: Diagnosis of sensors, verification of electronic circuits in activation; Triggered detector automatically performs analog sensor diagnostic every 10 minutes, digital sensors every 1 sec.
– Battery life: Two months (with NDIR CH4 sensor)
– Connected Worker: Bluetooth® Low Energy (BLE) – Ability to connect with Honeywell’s Safety Communicator App, Device Configurator App and Safety Suite Device Configurator software
– User options:
• Configure alarm settings Low, High, TWA, STEL
• Blocking alarms• Set calibration reminder and bump test
• Worker assignment and location• Always on(User options, only available through Device Configurator and Safety Suite Device Configurator)
– Warranty: Two-year warranty for sensors and deviceSensor specifications:
GASESRANGORESOLUCIÓNTEMPERATURA DE FUNCIONAMIENTO
CO0 to 2000 ppm1 ppm -40°C to 60°C (-40°F to 140°F)
H2S0 to 200 ppm1 ppm (ó 0.1 ppm)-40°C to 60°C (-40°F to 140°F)
SO20 to 150 ppm0.1 ppm-20°C to 50°C (-4°F to 122°F) intermitente
-40°C to 55°C (-40°F to 131°F)
O20 to 30% VOL0.1% VOL-40°C to 60°C (-40°F to 140°F)
NDIR-CH4 0 0 to 100% LEL1% LEL-40°C to 60°C (-40°F to 140°F)
Caution: The infrared LEL sensor used in the Honeywell BW ™ Icon + cannot detect hydrogen and acetylene. For applications involving these combustible gases, consider a catalytic bead LEL sensor or the CO-H2 sensor for hydrogen detection.
Certifications:
ATEX, IEC Ex, contains FCCID, contains IC
