Descripción
Reference: 1788155-B EAN code.-
Product name: Rd40 A2B2E2K2P3 plastic filter
Manufacturer: Honeywell Safety Products.
Protection Type: Respiratory protection
Product: RD40 Filter
Type: A2B2E2K2P3. RD40.
Brand: Honeywell Packaging: 1 unit
Weight: 395g
Characteristics:
Wide range of RD40 filters to use with OPTIFIT mask.
Lightweight and durable filter housing for greater comfort. Suitable for ATEX zones and/or nuclear industry. High-performance gas and particulate filtration beyond CE requirements, for excellent, longer-lasting filtration effectiveness. Cartridge structure for better breathing resistance and user comfort. Adapted design that clears the field of vision.
Life cycle.
It depends on the absorption capacity, concentration of the contaminant, humidity and breathing of the user.
Storage information:
Up to 10 years after the date of manufacture.
Up to 6 months after opening.
Store filters in a cool, dry place.
Storage temperature: -20/+50ºC.
Maximum humidity during storage: 80%.
Certifications:
PPE Category III.
EN 14387:2004
Checks before use:
Users should: Ensure that the level of protection offered by the filter is sufficient for the type and concentration of the contaminant in the work area.
Respect the useful life of the filter.
Check sealing points.
Limitations of use:
For use only by trained and qualified personnel.
Do not use if the oxygen level in the environment is less than 17%.
Do not use with organic gases and vapors with a boiling point below 65ºC.
After use, an opened filter will be properly repackaged with its lids if it is likely to be reused. It must be replaced within 6 months of opening.
If a user identifies a filter rupture through the smell or taste of a gas, the filter should be replaced immediately.
If the breathing resistance of the filter has increased significantly, it must be changed.
Particular precautions that must be taken in ATEX environments.
Filter with a mass greater than 300 g cannot be used directly on half masks.
